 Fluke Clamp Meters |
 |
Fluke 112/322 CK Electricians
Combo Kit
Rugged, reliable and accurate digital multimeter,
plus a compact current clamp meter — both packed in
a sleek, durable, Carrying Case.
|
 |
Fluke 116/322 HVAC Combo Kit with
Multimeter and Clamp Meter
For the complete solution to HVAC troubleshooting
the extra value-packed HVAC Multimeter and Clamp
Meter Combo Kit, provides the ability to
troubleshoot and solve problems more efficiently by
providing all the needed accessories an HVAC
professional would need in a compact carry case
|
 |
Fluke 321/322 Clamp Meters
The Fluke 321 and 322 are designed to verify the
presence of load current, AC voltage and continuity
of circuits, switches, fuses and contacts. These
small and rugged clamp meters are ideally suited for
current measurements up to 400 A in tight cable
compartments. The Fluke 322 also offers DC voltage
measurements and has a higher resolution for loads
below 40 A.
|
 |
Fluke 330 Series Clamp Meters
With the striking design of the Fluke 330 Series,
we've taken a new look at the way you make current
measurements. At how you use your tools, and how to
get the results you need, faster and more
conveniently.
|
 |
Fluke 345 Power Quality Clamp
Meter
This clamp on meter is a combination power analyzer,
power quality logger, and clamp meter, and is ideal
for monitoring electronic loads.
|
 |
Fluke 360 AC Leakage Current
Clamp Meter
Ideally designed for non-invasive checks of
insulation condition, the Fluke 360 leakage meter
allows you to perform tests without powering down
the installation or disconnecting equipment - saving
you time, without compromising on quality or safety.
|
 |
Fluke 771 Milliamp Process Clamp
Meter
Measure 4-20 mA signals without breaking the loop
with this new, compact clamp meter for PLC and
control systems analogue I/O. The detachable clamp
with extension cable allows you to take measurements
in tight locations, and the built-in spot light
illuminates hard to see wires in dark enclosures
|
 |
Fluke 902 True RMS HVAC Clamp
Meter
Heating, ventilation, air conditioning (HVAC)
technicians require a service tool that can
consistently keep up with their demands. The Fluke
902 expands the exisiting line of quality Fluke
clamp meters by delivering the features necessary to
diagnose and repair HVAC systems. Combined with True
RMS technology and a CAT III 600 V rating
|
 |
LH2015 AC/DC True RMS Clamp Meter
The LH2015’s large jaw is suitable for
current measurements up to 2000 A ac/dc on large
conductors or bus bars. The LH2015’s measurement
accuracy is unaffected by external magnetic fields
or off-center conductor positioning due to its
advanced jaw design.
|
 |
LH41 AC/DC Low Current Clamp
Meter
The compact size of the LH41 makes it ideal for
taking general measurements on small conductors. Its
excellent accuracy and resolution of 1 mA offers
exceptional performance at a reasonable price.
|
|
|
 |
|
|
 |
Model: ACD-14
TRMS-FX Digital Clamp-On Multimeter TRMS
Brand: Amprobe
|
|
- True RMS
- Dual Displays - Permits
simultaneous reading of Amperage &
Voltage
- Micro Amps measurement for
testing “Flame Sensors”
- AC and DC Voltage to 600V , AC
Current to 400A
- Temperature / Type-K
Thermocouple
|
|
|
|
Model: ACD-14 FX
Digital Clamp-On Multimeter
Brand: Amprobe
|
|
- Dual Displays - Permits
simultaneous reading of Amperage &
Voltage
- Micro Amps measurement for
testing “Flame Sensors”
- AC and DC Voltage to 600V
- Temperature / Type-K
Thermocouple
- AC Current to 400A
|
|
 |
Model: AD40B
Digital Ammeter
Brand: Amprobe
|
|
- Low-cost, miniature digital
ammeter
- 400 A AC range
- Maximum Jaw Opening: 25.4 mm
- 4000-count display with bargraph
|
|
 |
Model: AC40B Clamp
Type Digital Multimeter
Brand: Amprobe
|
|
- Mini-clamp DMM
- 400 A range
- 600 V AC and DC range
- 4000-count display with bargraph
- Autoranging
- Data Hold
|
|
 |
Model: ACDC-400
Digital AC/DC Clamp-on Multimeter
Brand: Amprobe
|
|
- AC/DC Current up to 400A
- AC/DC Voltage up to 600V
- Resistance measurement
- Continuity test
|
|
|
|
 |
Model: ACD-10 PLUS
600A Clamp-On Multimeter
Brand: Amprobe
|
|
- AC & DC Voltage to 600V
- AC Current to 600A
- Thin Jaws, only 10mm (0.4”)
thick
- Resistance to 40MΩ
|
|
|
|
Model: ACD-10
TRMS-PLUS 600A Clamp-On Multimeter TRMS
Brand: Amprobe
|
|
- TRMS Measurement
- AC & DC Voltage to 600V
- AC Current to 600A
- Thin Jaws, only 10mm (0.4”)
thick
- Resistance to 40MΩ
|
|
|
|
 |
Model: ACD-330T
Digital AC Clamp - On Multimeter
Brand: Amprobe
|
|
- True RMS (TRMS)
- Measures AC Voltage
- Measures DC Voltage
- Measures AC Current to 1000A
|
|
 |
Model: ACDC-3000
Digital AC/DC Clamp-on Multimeter
Brand: Amprobe
|
|
- True RMS (TRMS)
- Measures AC Voltage
- Measures DC Voltage
- Measures AC Current to 1000A
|
|
 |
Model: ACDC-620T
Clamp - On Multimeter
Brand: Amprobe
|
|
- True RMS (TRMS)
- Measures AC Voltage
- Measures DC Voltage
- AC Current to 1000A
|
|
|
|
 |
Model: AC50A AC
Leakage Clamp
Brand: Amprobe
|
|
- AC current measurement to 60A
- Leakage current measurement with
resolution of 0.01mA
- AC voltage to 400V
- Resistance measurement and
continuity beeper
|
|
 |
Model: LH41A AC/DC
Clamp-on Ammeter
Brand: Amprobe
|
|
- Precise Low Current Measurement
- 1mA Resolution
- Extremely Easy To Use
- Data Hold
- Auto Power Off
- Auto Zero Button To Zero Display
For DC
|
|
|
|
 |
Model: ACD-56 HPQ
Power Clamp-on
Brand: Amprobe
|
|
- AC Current up to 400A AC/DC
Voltage up to 600V
- Voltage and Current Harmonics up
to 25th with THD%
- Active, Reactive and Apparent
Power Single/Three Phase
- Power Factor, Cos Ø Single/Three
Phase/Energy
- Frequency (with test leads and
jaw)
- Phase sequence with single wire
(patented)
- TRMS Measurements
|
|
 |
Model: ACD-31P
1000A Clamp-on Power Meter
Brand: Amprobe
|
|
- TRMS sensing
- AutoVA - Auto Selection of AC
Volts, DC Volts or AC Amps
- Optional PC interface capability
(RS-232 KIT2)
- Back light display
- Measures Temperature
|
|
 |
Model: ACD-41PQ
1000A Clamp-on PQ Meter with Total
Harmonics Distortion measurement
Brand: Amprobe
|
|
- TRMS sensing measures Active
(W), Reactive (VAR) and Apparent
(VA) Power with dual-display Power
Factor readout
- Total Harmonics Distortion THD,
AC/DC Voltage up to 600V
- AC Current up to 1000A,
Resistance, Frequency, Temperature
|
|
|
|
 |
Model: AD105A TRMS
Digital Ammeter
Brand: Amprobe
|
|
- Broad range 1000 A, AC and DC
ammeter
- True-rms
- Peak Hold and DC Auto Zero
- Belt-clip sleeve case included
- 4000-count
|
|
 |
Model: ACD-6 PRO
Digital Clamp-on Multimeter
Brand: Amprobe
|
|
- Auto and manual ranging
- Relative zero mode
- Auto power off
- Data hold
|
|
|
|
Model: ACD-6 TRMS
PRO Digital Clamp-on Multimeter
Brand: Amprobe
|
|
- Auto and manual ranging
- Relative zero mode
- Auto power off
- Data hold
|
|
 |
Model: ACDC-100
AC/DC Digital Clamp-on
Brand: Amprobe
|
|
- Auto and manual ranging
- Relative zero mode
- Auto power off
- MAX capture function for inrush
current measurements (30 mS
response)
- Large, easy to read LCD display
|
|
 |
Model: ACDC-100
TRMS AC/DC Digital Clamp-on TRMS
Brand: Amprobe
|
|
- TRMS and Display Backlight
- Relative zero mode
- Auto power off
- MAX capture function for inrush
current measurements (30 mS
response)
- Large, easy to read LCD display
|
|
|
|
 |
Model: ACD-15 Pro
2000A Digital Clamp-on Multimeter
Brand: Amprobe
|
|
- Measurements: AC/DC Voltage up
to 600V, AC Current up to 2000A,
Resistance, Frequency and
Capacitance
- Non-contact Voltage Level
Detection
- Diode Test
|
|
 |
Model: ACD-15 TRMS
PRO 2000A Digital Clamp-on Multimeter
TRMS
Brand: Amprobe
|
|
- TRMS & Backlight Screen
- Non-contact Voltage Level
Detection
- Diode Test
- Measurements: AC/DC Voltage up
to 600V, AC Current up to 2000A,
Resistance, Frequency and
Capacitance
|
|
|
|
 |
Model: ACD-16 TRMS
Pro 1000A Data-Logging Clamp-on
Multimeter TRMS
Brand: Amprobe
|
|
- TRMS & Backlight Screen
- Measurements: AC/DC Voltage up
to 600V, AC Current up to 1000A,
Resistance, Frequency and
Temperature
- Data-logging 5400 points
- Optional PC interface capability
(RS-232 KIT2)
|
|
 |
Model: ACD-16 Pro
1000A Data-Logging Clamp-on Multimeter
Brand: Amprobe
|
|
- Measurements: AC/DC Voltage up
to 600V, AC Current up to 1000A,
Resistance, Frequency and
Temperature
- Data-logging 5400 points
- Optional PC interface capability
(RS-232 KIT2)
- Large, easy to read LCD display
|
|
|
|
 |
Model: AC68C Clamp
Type Digital Multimeter
Brand: Amprobe
|
|
- Top-of-the-line professional
clamp DMM
- 8 functions/11 ranges
- 8 functions/11 ranges
- Data and AC Peak Hold
- DC auto zero
- Carrying case included
|
|
 |
Model: AC71B
Automatic AC Clamp Multimeter
Brand: Amprobe
|
|
- AutoTect™ Function –
automatically selects ac volts, dc
volts or resistance depending upon
measurement point
- Automatic bright blue backlight
turns on when a dark environment is
sensed
- Easy one-button control
- AC current to 600 A , AC volts
to 750 V, DC volts to 1000 V
|
|
 |
Model: AC75B
Digital Clamp-on Meters
Brand: Amprobe
|
|
- Clamp meter, a multimeter, and a
thermometer into one meter
- 600A AC current
- Digital thermometer to 400 °C
(1000 °F), Type K probe included
- AC/DC Volts 750 V/1000
|
|
|
|
 Kyoritsu Clamp Meters |
 |
2413R Leakage Clamp Meter
Large transformer jaws of 68mm diameter makes it
possible to clamp on all three or four wires (3
phases) together for leakage current measurement. •
True RMS enables an accurate measurement for
distorted waveforms. • Measurement from mA up to AC
1000A • Frequency filter switch to eliminate the
effect of the harmonics. • 2 way analogue output
terminal
|
 |
2040 Digital Clamp Meter
Designed to meet international safety standard
IEC61010-1 CAT.IV 600V. • CAT.IV Clamp Meters can
measure the Voltage and Current in both very low and
high power circuits. • Thus, very useful for power
distribution companies, power utilities and
maintenance fields. • Red LED, as "Non Contact
Voltage" function, gives warning to the user on the
presence of AC Voltage.
|
 |
2002PA Digital Clamp Meter
Can measure large AC current up to 2000A. • Peak
hold function. • 55mm-dia large tear drop shaped
jaws.
|
 |
2002R Digital Clamp Meter
Can measure large AC current up to 2000A. • Peak
hold function. • 55mm-dia large tear drop shaped
jaws.
|
 |
2006 Digital Clamp Meter
Pocket size, handy clamp meter. • UL listed fire
retardant plastic housing case. • Multifunction
instrument having voltage and resistance measurement
functions in addition to all the ranges
incorporated.
|
 |
2007A Digital Clamp Meter
Sleep function to save battery • Data hold function.
• Digital display with maximum 4000 counts.
|
 |
2017 Digital Clamp Meter
Tear drop shaped jaws for ease of use in tight
places and crowded cable areas. • Designed to meet
internationally proven safety standards such as
IEC61010-1, UL3111 and VDE0411. • Three functions in
one unit; AC current, AC voltage and resistance. •
Resistance range provides audible continuity test. •
Frequency response from 40Hz to 1kHz on AC current
and voltage
|
 |
2027 Digital Clamp Meter
True RMS reading instrument that permits precise
measurements of non-sinusoidal waveform AC current
and voltage. Accurate measurements are also possible
at low frequencies from 10Hz upwards. • Designed to
meet internationally proven safety standards such as
IEC61010-1, UL3111 and VDE0411. • Three functions in
one unit; AC current, AC voltage and resistance.
|
 |
2031 Digital Clamp Meter
Can measure large AC current up to 200A. • 24mm-dia
tear drop shaped jaws.
|
|
|
 |
2412
Digital clamp meter with tear drop shaped, medium
size transformer jaws specially designed for leakage
current measurement. • Frequency filter switch to
eliminate the effect of harmonics. • Output terminal
for connection to recorders and facility to operate
from external power supply permit continuous leakage
current monitoring.
|
 |
2413F
Extra wide transformer jaws are best suited
for clamping on all three or four wires (3phases)
together for leakage current measurement. •
Frequency filter switch to eliminate the effect of
harmonics. • Peak hold function. • Analogue output
terminal
|
 |
2417
Water and dust proof construction. The instrument is
protected against water and dust. • True RMS for
accurate measurement of non-sinusoidal waveform
current. • Selectable frequency response of 50/60Hz
only or up to 1kHz. • Automatically turns power off
in about 30 minutes to conserve battery life.
|
 |
2431
Frequency Selector Switch to eliminate the effect of
harmonics. • Three AC current ranges
20mA/200mA/200A. • 20mA range with a minimum
resolution of 0.01mA. • Auto power-off function
(automatically turns off in about 10 minutes). •
Rotary switch for easy one finger power-on and range
selection
|
 |
2432
High Sensitive Model • Frequency Selector Switch to
eliminate the effect of harmonics. • Three AC
current ranges : 4mA/40mA/100A • Data hold function.
• Peak hold function. • Sleep function to save
battery. • Designed to international safety standard
IEC61010-1 CAT.III 300V
|
 |
2433
Frequency Selector Switch to eliminate the effect of
harmonics. • Three AC current ranges :
40mA/400mA/400A. • Data hold function. • Peak hold
function. • Sleep function to save battery. •
Designed to international safety standard IEC61010-1
CAT.III 300V
|
|
|
2433R
Frequency Selector Switch to eliminate the effect of
harmonics. • Three AC current ranges:
40mA/400mA/400A. • Data hold function. • Peak hold
function. • Sleep function to save battery. •
Designed to international safety standard IEC61010-1
CAT.III 300V
|
 |
2434
Least affected by external stray magnetic field. •
20mA AC max. in proximity to a 15mm-dia conductor
carrying 100A AC • Frequency Selector Switch to
eliminate the effect of harmonics. • Data hold
function • Sleep function to save battery
|
|
|
 |
2046R
Designed to meet international safety standard
IEC61010-1 CAT.IV 600V. • CAT.IV Clamp Meters can
measure the Voltage and Current in both very low and
high power circuits. • Thus, very useful for power
distribution companies, power utilities and
maintenance fields. • True RMS enables an accurate
measurement.
|
 |
2055
Designed to meet international safety standard
IEC61010-1 CAT.IV 600V. • CAT.IV Clamp Meters can
measure the Voltage and Current in both very low and
high power circuits. • Thus, very useful for power
distribution companies, power utilities and
maintenance fields. • Red LED, as "Non Contact
Voltage" function, gives warning to the user on the
presence of AC Voltage.
|
 |
2056R
Designed to meet international safety standard
IEC61010-1 CAT.IV 600V. • CAT.IV Clamp Meters can
measure the Voltage and Current in both very low and
high power circuits. • Thus, very useful for power
distribution companies, power utilities and
maintenance fields. • True RMS enables an accurate
measurement.
|
 |
2003A
Equipped to measure both AC and DC current with
transformer jaws of large diameter. • Can measure AC
and DC currents up to 2000A. • Output terminal for
connection to recorders. • AC/DC voltage, resistance
measurement and continuity functions also
available.
|
 |
2004
Smallest clamp meter capable of AC and DC current
measurements. • 20A range has a minimum resolution
of 0.01A AC/DC. • AC/DC voltage and resistance
measurement functions also available.
|
 |
2009A
True RMS reading instrument ideal for accurate
measurement of distorted waveforms and
non-sinusoidal waveforms arising from thyristors. •
Can measure AC and DC currents up to 2000A. • Output
terminal for connection to recorders.
|
 |
2010
High sensitivity, miniature AC/DC clamp meter. •
0.1mA minimum resolution for AC current and 1mA
minimum resolution for DC current. • Output terminal
for recorder connection.
|
 |
2033
Smallest clamp meter capable of AC and DC current
measurements. • 300A auto ranging has minimum
resolution of 0.01A AC/DC. • Auto-zero function to
allow one touch zero adjustment.
|
 |
2037
Measures both AC and DC current and voltage with
high accuracy. • True RMS reading instrument that
permits precise measurements of non-sinusoidal
waveform AC current and voltage. Ac curate
measurements are also possible at low frequencies
from 10Hz upwards. • Peak, average and frequency
measure-ment functions.
|
|
|
 |
2300R
True RMS reading is an essential feature for
accurate measurement. • “Non Contact” voltage
function indicates the presence of AC voltage by
warning the user with an audible signal. • Set the
DC current range to zero in one touch with the Zero
Adjust function. • Auto Power Off. • Data Hold (AC A
/ DC A only). • Designed to international safety
standard IEC61010-1 CAT.III 300V.
|
|
|
 |
2608A
DC voltage range is also available especially for
checking emergency battery operated power supply. •
Can measure temperature using optional probe. • Tear
drop shaped transformer jaws for ease of use.
|
 |
2805
Range switch selects only one rotary scale at a
time, making it easy to take readings correctly. • A
long time seller with proven reputa-tion world wide
for its easy-to-use functions.
|
 |
8006
AC CLAMP ADAPTOR • Model 8006 is designed to measure
AC current up to1500A. • It can accommodate up to
60mm-dia conductor or 50mm by 75mm bus-bar.
|
 |
8112
AC CLAMP ADAPTOR • Model 8112 clamp adaptor is
designed to be an AC current/voltage conversion
probe capable of measuring AC current from 0.1mA to
120A in conjunction with digital multimeters. Simple
to operate, the unit has range switch position at
200mA,2A and 20A. It also features safety design
throughout with no exposed metal parts.
|
 |
8112 BNC
Model 8112BNC is an AC clamp adaptor designed for
use with oscilloscopes. Output cord has a BNC
connector which enables direct observation of
current waveform on oscilloscope.
|
 |
8113
Model 8113 is a clamp-on AC/DC current/voltage
converter that permits AC/DC current measurements
from 1mA to 200A in conjunction with a voltmeter
having 0.1mV resolution.
|
