 Fluke Earth Testers |
 |
Fluke 1621 Earth Ground Tester
The Fluke 1621 is an easy-to-use earth ground
tester. For ground resistance testing, the 1621 is
the first line of defense in detecting reliable
ground connections. The unit features basic ground
testing methods including 3-pole Fall-of-Potential
as well as 2-pole ground resistance tests. Its
convenient size, rugged holster, and large, clear
LCD display
|
 |
Fluke 1625/1623 Geo Earth Ground
Testers
The Fluke 1623 and 1625 are distinctive earth ground
testers that can perform all four types of earth
ground measurement. Specifically, the Fluke 1623 and
1625 testers are able to measure earth ground loop
resistances using only clamps – called Stakeless
testing. This method doesn’t require the use of
earth ground stakes or the disconnection of ground
rods.
|
 |
Fluke 1630 Earth Ground Clamp
Meter
The clamp-on ground testing technique used by the
Fluke 1630 simplifies ground loop testing and
enables non-intrusive leakage current measurement.
The compact and rugged design makes the Fluke 1630
easy to use in small places and harsh environments,
while the ‘display hold’ and the continuity testing
with an audible alarm function ensures convenience
in use.
|
 |
Handy Geo Earth Ground Tester
The Handy Geo Earth Ground Tester is a rugged, easy
to use tester for three-pole ground resistance
measurements and two-pole ac resistance
measurements. Earth Ground resistance is measured by
installing Earth Ground test electrodes and testing
with the Handy Geo. Earth Ground resistance
measurements are used to ensure safe operation and
reduce power quality problems.
|
|
|
Ground Resistance Testers
|
 |
Model: GP-2 Ground
Resistance & Resistivity Tester
Brand: Amprobe
|
|
- Measures Earth ground resistance
- 3 point (fall of potential) or 2
point tests
- Automatically calculates
resistivity - 4 point test
- Automatic voltage measurement
prevents false measurements
- Automatically applies three
testing frequencies for the most
accurate readings
|
|
 |
Model: DGC-1000A
Clamp-on Ground Resistance Tester
Brand: Amprobe
|
|
- Accurate ground resistance
measurement from 0.025 to 1500 Ohms
- TRMS current measurement
including leakage current
- Accurate readings regardless of
power quality in less than 10
seconds
- Continuity beep if the
resistance is lower than 40.00 Ohms
|
|
|
|
 Kyoritsu Earth Testers |
 |
4200
The earth resistance from 0.05 to 1200ΩO can be
measured without the auxiliary earth spikes.(The
Multiple Earthing System.) • True RMS Accurate
readings of AC current including distorted waveform
from 1mA to 30.0A • Noise Check Function A function
to detect current, which effects on an earth
resistance measurement and display "NOISE" mark on
the LCD.
|
 |
4102A
The latest circuit design permits the instrument to
operate with the minimum of influence from earth
voltage and earth resistance of auxiliary earth
spikes. • Dust and drip proof. (designed to IEC 529
IP54) • Earth resistance value can be read directly
from the scale. • Designed to meet IEC61010-1 safety
standard. Capable of measuring earth voltage. •
Small and lightweight.
|
 |
4105A
Dust and drip proof.(designed to IEC 529 IP54) • In
addition to the facility for precision measurement,
test leads for simplified two wire measuring system
also supplied as standard accessories.(unit can be
hung from the neck for simplified measurement) •
Designed to meet IEC61010-1 safety standard. •
Capable of measuring earth voltage.
|
