Rohde & Schwarz Power Meters |
|
|
 |
NRP Power Meter
The basic unit, which can accommodate up to 4
sensors at the same time, can be fully
remote-controlled. In addition, the sensors can be
connected not only to the basic unit, but also to a
PC, which is usually present in most cases.
|
 |
NRP-Z Sensors
These sensors are intelligent standalone instruments
that communicate with the base unit or a PC via a
digital interface. Dynamic range: up to 90 dB
,Level range: -67 dBm ... +45 dBm, Frequency range:
9 kHz to 40 GHz.
|
 |
NRVD Dual Channel Power Meter
NRVD functions like two independent NRVS power
meters in one enclosure performing simultaneous
measurements and exchanging data with each other.
The two channels can be set separately so that two
completely different measurements can be carried out
at the same time.
|
 |
NRVS Power Meter
Power (average, pulse, PEP), level and DC voltage
measurements. The NRVS is an ideal instrument for a
great variety of power measurement applications in
labs and systems. Thanks to its intelligent sensors
with calibration data memory and thermocouple
sensors.
|
 |
NRV-Z Power Sensors
15 different types of power sensors in all cover the
frequency range from DC to 40 GHz and the power
range from 100 pW (−-70 dBm) to 30 W (+45 dBm). In
addition to thermal sensors, which are ideal as a
high-precision reference for any waveform, diode
sensors are available.
|
|
|
 |
NRT Power Reflection Meter
Directional power meters are connected between
source and load and measure the power flow in both
directions. The power applied to the load and
the reflection can thus be measured. Typical
applications are installation, maintenance and
monitoring of transmitters and antennas.
|
 |
NRT-Z Power Sensors
Very flexible power sensor for use with the NRT or
stand alone on a PC. From 25MHz up to 4GHz and up to
2000W PEP. Measures RMS power, Burst Power &
PEP power. It also measures Crest Factor and CCDF.
|
|
|
 |
URV35 Level Meter
URV35 is a voltmeter and power meter for versatile
applications in service and production as well as
for precision measurements in RF and microwave labs.
A large variety of probes and sensors allows voltage
measurements up to 3 GHz and power measurements up
to 40 GHz.
|
 |
URV55 Millivolt Meter
Millivoltmeter URV55 is suitable for voltage
measurements up to 3 GHz as well as for power and
level measurements up to 40 GHz. Thanks to probes
with calibration data memory and temperature
sensors, which make adjustments by the user
superfluous.
|
 |
URV5 Millivolt Meter
URV5 is a broadband voltage, level and power meter
of high accuracy and sensitivity. It is suitable
both for manual operation and for use in systems. A
wide choice of individually calibrated probes and
sensors allows URV5 to be used for a great variety
of measurements.
|
 |
URV5-Z Voltage Sensors
The voltage sensors are indispensable tools in RF
and microwave laboratories, test departments and
service. They cover a frequency range from 9 kHz to
3 GHz and thus close the gap between low-frequency
voltage measurements and microwave power
measurements
|
 |
URE2 RMS Voltmeter
URE2 is a broadband RMS voltmeter featuring
extremely high accuracy and speed. A patented
rectifier circuit allows measurement of signals with
a crest factor of up to 7 and frequencies of up to
25 MHz.
|
Hameg
Power Meter |
 |
HM8115-2 8kW Power Meter
Power measurement up to 8 kW Simultaneous voltage,
current and power display Display of apparent,
effective and reactive power Power factor display
Auto ranging, simple operation Suitable for
measurements on frequency converters DC frequency
range to 1 kHz RS-232 interface, optional: USB,
IEEE-488.
|
RF Power
Meters
|
|
 |
IC-002 Multi-range RF Wattmeter
An accurate, portable, RF power meter.
|
 |
IC-500, IC-501, IC-502 Artificial
Loads
The three artificial loads have coaxial input.
|
