 Hameg Power Supplies |
 |
HM7042-5 Triple Power Supply Unit
2x 0–32 V / 0–2 A, 0–5.5 V / 0–5 A Separate voltage and
current displays for each output: 4 digits at channel
I+III; 3 digits at channel II Display resolution: 10
mV/1 mA at channel I+III; 10 mV/10 mA at channel II
Adjustable current limiting and electronic fuse for each
output Pushbutton for activating/deactivating all
outputs Low residual ripple, high output power
|
 |
HM7044 Quadruple High Performance
Power Supply Unit
4x 0-32 V / 0-3 A Up to 384 W output power;
pre-regulation with DC/DC converter ensures low
dissipated power 4-digit display for current and voltage
Display resolution 10 mV / 1 mA Linear inline regulator
with low residual ripple Tracking mode for all outputs
Adjustable current limiter and electronic fuse for each
output SENSE lines for each output.
|
 |
HM8143 Arbitrary Power Supply Unit
2x 0-30 V/0-2 A 5 V/0-2 A Display resolution 10mV/1mA
Arbitrary waveform power supply (1024 points, 12 bit)
Tracking mode for 30 V outputs External modulation of
output voltages Electronic load up to 60 W per channel
(max. 2 A) SENSE lines Multimeter mode for all
adjustable outputs
|
 |
HM8040-3 Triple Power Supply Unit
2x 0–20 V / 0.5 A, 5 V / 1 A 3-digit switchable displays
for current and voltage Display resolution 0.1 V/1mA
Adjustable current limiting Linear in line regulator Low
residual ripple and low noise Pushbutton for
activating/deactivating all outputs Electronic fuse
|
 Promax Power Supplies |
 |
FA-851 Programmable DC Power Supply
Programmable Power Supply is controlled by Micro
Processor Unit (MPU) that can easily connect
communication interface RS-232 or GPIB to a computer.
|
 |
FA-363B, FA-376, FA-662B, FA-665
Power Supplies
These power supplies possesses the major advantages
given by the use of linear and commutation technology.
|
 Rohde & Schwarz Power Supplies |
 |
NGMO Single/Dual Channel Analyzer/Power
Supply
This is more than just a simple power supply for
test and measurement applications. This is shown by
its advanced features: Accurate high-speed voltage
source, Programmable DC load, Precise digital
voltmeter, Transient recorder, Simple squarewave
generator delivering high o/p.
|
 |
R6240A DC Voltage and Current
Source/Monitor R6240A
4 quadrant precision voltage/current source/monitor
with ±15V / ±1(4)A. Pulse source/measurement with
1µs resolution. Extensive sweep and pulse sweep
functions. Setting resolution: up to 100µV / 100nA .
Measurement resolution: up to 10µV / 10nA .
|
 |
NGPX Programmable Power Supply
Power Supplies NGPX are high-performance
programmable laboratory units (350 W) using linear
regulation. With their excellent regulation
characteristics these 19" units are ideal for use in
development labs.
|
 |
NGPS32 Programmable Voltage
Source
A programmable voltage source with two isolated
identical outputs. The bipolar output voltages (...
32 V to +32 V) can be set either manually or via the
IEEE488 interface. Two integrated simple arbitrary
generators allow independent output of low-frequency
waveforms.
|
 |
R6243/6244 DC Voltage Current
Source/Monitor
R6243/6244 is a DC voltage and current
source/monitor with wide ranges of generation and
measurement. Voltage = 0 to ±110 V, current = 0 to
±2 A The R6243/6244 provide high accuracy with a
setting resolution of 4 1/2 digits and a measuring
resolution of 5 1/2 digits
|
 |
NGPQ 32/6 Programmable Power
Supply
The new programmable DC Power Supply NGPQ32/6 is a
general purpose laboratory power supply, useable in
all applications, where the quality of the supply
voltage plays an important role for proper DUT
operation. 32V/6A
|
 |
NGPL 6/5 Programmable 4-channel
Power Supply
Economic Mobile Phone power supply. 4 channels with
max. 30W output power each. x. 0 to 6V / 0 to 5A
each channel, Setting resolution 1mV, 1mA, Readback
resolution 1mV, 100µA.
|
 |
NGPT Programmable Triple Power
Supply
0-35V. Three displays are provided for indication of
the nominal and actual values. A separate display is
provided for status information and menu-guided
operation. 19" system unit, full system capability
via IEC/IEEE bus interface (IEC625-1/IEEE488-2)
|
 |
NGPE35/40 and NGPE70/20
Programmable DC Power Supply
Programmable DC Power Supply .0V to 35 V/ 0A to 40 A
/ 0V to 70V / 0A to 20A, 1400 W output power, IEEE
488.
|
 |
NGPE 40/40 Programmable power
Supply
0-40V/0-40A. Programmable Power Supply NGPE is
suitable for use in test systems and for general
laboratory applications. The relatively small output
capacitance, the short setting time even for down
programming as well as the voltage and current
monitoring outputs.
|
 |
NGSM32/10, NGSM 60 Programmable
DC Power Supply
with Arb Function
NGSM are versatile supply and measuring units for
testing electronic car components by simulating real
operating conditions. In addition to a wide field of
car electronics, it can be used in mobile radio, car
hifi applications and mechanical engineering.
|
 |
NGPV Programmable Power Supplies
Up to 10A. The version for use in systems and labs
can be programmed via IEC/IEEE bus or operated
manually. These power supplies are provided with the
necessary operating controls, a digital LED display
for indication of all input data including
IEC/IEEE-bus commands.
|
 |
NGPU Programmable Power Supplies
NGPU are constant voltage or constant-current
sources, which can be programmed via IEC/ IEEE bus
or operated manually. Three current ranges and one
floating test output which can be switched between
voltage and current make them ideal for use in IEC/
IEEE-bus test systems.
|
 |
NGMD, NGL, NGT Multiple output
bench top Power Supplies
A switchable panel meter is provided for each
output. The 20 V, 25 V, 35 V outputs can be used
separately, in series or parallel connection or in
tracking mode. The independent 6 V output with its
load rating of 5 A is especially designed for the
supply of digital integrated circuits.
|
 |
NGRU Power Supplies
Precision lab units providing high accuracy of
voltage and current settings .They can be used as
constant-voltage or constant-current sources. The
max output power is 150 W and remains constant over
a wide voltage range. The current loadability
depends on the output voltage.
|
 |
NGM, NGK, NGB, NGAS Single output
bench top Power Supplies
Compact, low noise, general purpose up to
350W.Suitable for use as constant-voltage/
constant-current sources with automatic regulation
of voltage-to-current transition (LED indication)
and as battery eliminator with switch-selected delay
for current regulation.
|
 |
NGRE 19” Power Supplies
R&S NGRE provide high output power (up to 2000
W). There are 27 basic versions, most of which come
in five models. The basic versions only differ in
the obtainable maximum voltage and current values
and in the output impedance.
|
