 |
 |
Fluke 164 Handheld Multifunction Counters
This remarkable instrument combines the high
accuracy of a top performance counter and a
wide-band DVM with a visual waveform display. The
multi parameter display shows up to ten different
signal parameters simultaneously. The 50 MHz
waveform display gives a precise picture of your
input signal trigger conditions
|
 |
PM6681 High Performance Counter/Timer
The PM 6681 from Fluke sets the standard for
measurement of time intervals, frequency, phase and
jitter. PM 6681 is much more than just a
timer/counter. Its speed and resolution are
comparable to the most accurate time and frequency
modulation domain analysers. Connected to your PC
running Fluke's TimeView™ software, PM 6681 fully
matches a dedicated modulation domain analyzer.
|
 |
PM6681R Rubidium Counter/Calibrator
The PM 6681R sets the new standard for measurement
and analysis of time intervals, frequency, phase and
jitter. For development, calibration, or challenging
production test applications, the PM 6681R is the
leader.
|
 |
PM6685 Universal Frequency Counter
The PM 6685 is easy to use, compact, and most
important of all, it has today's smartest input
triggering for frequency measurements. The battery
option for the PM 6685 maintains oven stability for
20 hours, giving you instant oven performance even
after long transportation.
|
 |
PM6685R Rubidium Counter Calibrator
With a built-in Rubidium atomic resonance-controlled
frequency reference, the PM 6685R is the most
accurate frequency counter on the market and it has
the additional benefit of full portability.High
stability, high accuracy and short warm-up time make
this instrument ideal for high-accuracy calibration
procedures outside the calibration laboratory
environment
|
 |
PM6690 Counter/Timer/Analyser
The Fluke PM 6690 timer-counter-analyzer is the most
versatile and accurate tool for measuring time,
frequency, or phase. On top of that, the PM 6690 has
built-in analysis capabilities that give you the
dynamics and the statistical behavior of the
parameter under test. The PM 6690 offers an
intuitive user interface and graphical display which
makes it easier to use than any other
timer-counter.
|
Hameg Timers /Counters |
|
 |
HM8123 3GHz Universal Counter
Frequency range from 0 Hz to 3 GHz 400 MHz
time base with 0.5 ppm stability Two identical
inputs, up to 200 MHz each 9-digit resolution at 1
sec. gate time 9 measurement functions, external
gate and arming Input for external time base (10
MHz) Display modes: numeric, histograms or trend
plots OCXO optional RS-232 Interface, optional: USB,
IEEE-488.
|
 |
HM8021-4 1.6GHz Universal Counter
Frequency range: 0 Hz – 1.6 GHz 10 MHz time basis
with 1 ppm stability (TCXO) Input A:Input impedance
1 M Ohm, maximum sensitivity 20 mVrms Input C: Input
impedance 50 Ohm, maximum sensitivity 30 mVrms Time
interval resolution up to 10 ps Offset mode over the
entire measurement range Gate input (in combination
with HO801.
|
Timers /
Counters
|
|
 |
FD-853 Frequency Counter
The model FD-853 is a RF Frequency Counter designed for
system and bench use with max 9 digits resolution,
featuring RS-232C and GPIB interfaces with full remote
control capability.
|
 |
FD-252 Digital Frequency Counter
The instrument is equipped, in addition to the 20 Hz-160
MHz input, a second input for measurement up to 2.4 GHz
with an impedance of 50 Ohms.
|
 |
FD-130 Handheld Digital Frequency
Meter
Portable frequency counter with an 8-digit liquid
crystal display (LCD) which allows the measurement of
frequencies in the range 5Hz to 1.3 GHz.
|
